Search parts for your vehicle
We found your bike is one of ours — please enter your frame number to find the exact model.
Description
"In the category of Starter Motor, Starter Motors"
The starter motor is responsible for turning the engine over during ignition and allowing everything else to happen. When you turn the ignition on, the starter motor engages and turns the engine over allowing it to suck in air. On the engine, a flywheel, with a ring gear attached around the edge, is fitted to the end of the crankshaft. On the starter, the pinion is designed to fit into the grooves of the ring gear. When you turn the ignition switch, the electromagnet inside the body engages & pushes out a rod to which the pinion is attached. The pinion meets the flywheel and the starter motor turns. This spins the engine over, sucking in air (as well as fuel). As the engine turns over, the starter motor disengages, and the electromagnet stops.
Product Diagram
| Ref | Item Name | Price | ||
|---|---|---|---|---|
| 1 |  |
Flanged Hex Bolt M6 x 28mm BLT518 x 1
|
£2.49 | |
| 2 | |
Starter Motor Reduction Gear Shaft WSH60 x 1
|
£8.49 | |
| 3 | |
Washer 10.5 x 18 x 0.5mm WSH111 x 1
|
£1.99 | |
| 4 | |
Starter Motor Cable Length 750mm STM080 x 1
|
£26.49 | |
| 5 | |
Starter Motor Reduction Gear GRRD013 x 1
|
£5.49 | |
| 6 | |
O-Ring 62 x 66 x 3mm ORNG035 x 1
|
£2.49 | |
| 7 | |
Starter Motor Casing STM038 x 1
|
£3.99 | |
| 9 | |
Secondary Starter Motor Reduction Gear for SK125-22-E4 GRRD040 x 1
|
£11.49 |
Compatibility
| Manufacturer | Model | Diagram |
|---|---|---|
| Lexmoto | Isca 125 Euro 5 [SK125-L-E5] | View parts diagram |
You Might Also Like
-
Your Cart
(0 Item(s) in Cart) -
No item(s)
-
Subtotal
£0.00 - Checkout
